Industrial Weather Station Introduction：

user's manual

Met One Instruments’ Industrial Weather Stations are configured to provide plant operators with the weather data needed for operations, regulatory compliance, safety and emergency response. The systems use reliable and accurate sensors to measure the weather variables of interest. Depending on output/input requirements, the data logger outputs either an analog voltage or digital RS-232 / RS-485 in ASCII or MODBUS format, or 4 -20 mA current loop for connection to the plant’s DCS, PLC’s or SCADA system. The data logger will also store the data and, if required, perform computational preprocessing such as averages, standard deviations, maximum/minimum, as well as providing certain control and alarm functions including E-mail and text alerts.

1. Complete Integrated, Tested, Documented System
2. Reliable, Proven Sensors
3. Analog Voltage or Serial RS-232C or RS-422/485
4. MODBUS protocol
5. Optional Current Loop Output to DCS, PLC’s or SCADA
6. Low Power
7. Cloud Data Handling & Alert Options

• Wind speed
• Wind direction
• Ambient temperature
• Relative humidity
• Barometric pressure
• Rain (optional)
• Solar radiation (optional)
• Visibility (optional)

1. 597 Temperature/Humidity/Pressure Combo
2. 010C/020C Wind Sensors
3. 083E/085 Relative Humidity/ RH & T
4. 061/065 Temperature
5. 074 Shield
6. 370/380 Precipitation Gauges
7. 094 Solar Radiation Sensor
8. 6400 Visibility Sensor
9. 580/136 Automet Loggers
10. CCS COMET Cloud Service
11. COMET Software

• Renewable Energy
• Dust Monitoring
• Environmental Monitoring
• Ambient Monitoring
• Fenceline Monitoring
• Industrial Facility & Process Monitoring
• Climate Research